陈志平,林森

• 1:江西博星项目咨询有限公司

摘要(Abstract)：

电阻点焊在汽车车身制造中应用广泛，具有效率高、焊接质量高、自动化程度高、灵活性好等优点。从国内外关于电阻点焊的研究出发，包括参数优化、电极优化和新材料应用等，总结电阻点焊的研究现状；进一步探讨近年的新型复合电阻点焊技术，如超声波复合电阻焊接、激光复合电阻焊接等；基于当前研究现状提出存在的问题并展望未来的发展方向。

关键词(KeyWords)： 电阻点焊;力学性能;铝/铝焊接;铝/钢焊接

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 陈志平,林森

DOI: 10.19710/J.cnki.1003-8817.20240267

参考文献(References)：

• [1] MENG Y F, GONG M C, ZHANG S, et al. Effects of Oscillating Laser Offset on Microstructure and Properties of Dissimilar Al/Steel Butt-Joint[J]. Optics and Lasers in Engineering, 2020, 128.
• [2] SUN Y F, FUJII H, TAKAKI N, et al. Microstructure and Mechanical Properties of Dissimilar Al Alloy/Steel Joints Prepared by a Flat Spot Friction Stir Welding Technique[J]. Materials&Design, 2013, 47:350-357.
• [3] CUI L, CHEN B X, CHEN L, et al. Dual Beam Laser Keyhole Welding of Steel/Aluminum Lapped Joints[J]. Journal of Materials Processing Technology, 2018, 256:87-97.
• [4] MUKHOPADHYAY P, GHOSH A. High Vacuum Brazing of Synthetic Diamond Grits with Steel Using Micro/Nano Al2O3 Reinforced Ag-Cu-Ti Alloy[J]. Journal of Materials Processing Technology, 2018, 266:198-207.
• [5]郭瑞鹏,杨战利,李远.电阻焊在工业生产中的应用及发展现状[J].机械制造文摘（焊接分册）, 2015(1):35-38.
• [6]胡心彬,万斌,董仕节.汽车用镀锌钢板电阻点焊工艺参数的优化[J].热加工工艺, 2010, 39(23):206-207.
• [7]阎俊霞,胡云岩,睢丙东.电阻点焊工艺参数正交试验优化设计[J].河北科技大学学报, 2003(2):39-42+52.
• [8]蔡洪能,王雅生,张占伟,等.汽车用钢板电阻点焊工艺参数优化选择方法[J].材料工程, 2006(1):304-306+309.
• [9]吴跃翔,康正阳,苏小平.基于正交试验与信噪比分析的铝合金钳体支架压铸工艺参数优化[J].热加工工艺,2023, 52(1):67-70.
• [10]宋文鑫.基于灰色田口法优化MIG焊接工艺稳定性与接头力学性能[D].太原:太原理工大学, 2022.
• [11]李涛,李芳,顾勇,等.基于田口方法的铸铝A356焊接工艺参数优化研究[J].热加工工艺, 2016, 45(9):43-47.
• [12] BHUYAN P, SAHOO S S, MAHANANDA S, et al. Optimisation of Resistance Spot Welding Parameters Using Taguchi’s Orthogonal Array[J]. Materials Today:Proceedings, 2024.
• [13]张旭强,罗爱辉,张延松,等.点焊热镀锌双相高强度钢的电极磨损规律[J].焊接学报, 2006(9):108-112+118.
• [14]帅歌旺,周平建,刘建彬.电阻点焊电极的研究进展与发展趋势[J].材料导报, 2015, 29(7):59-62+70.
• [15]佘亚东. 5083铝合金电阻点焊接头成型及电极失效研究[D].石家庄:河北科技大学, 2019.
• [16] JO H, KIM D, KANG M, et al. Effects of Surface Roughness and Force of Electrode on Resistance Spot Weld Ability of Aluminum 6061 Alloy[J]. Applied Sciences,2019, 9(19).
• [17]钟丽慧,韩立军,梁琼,等.电极形式对铝合金中频点焊焊接性的影响研究[J].电焊机, 2023, 53(12):113-118.
• [18] WANG Y J, TAO W, YANG S L. A Method for Improving Joint Strength of Resistance Spot Welds of AA5182-O Aluminum Alloy[J]. Journal of Manufacturing Processes, 2019, 45:661-669.
• [19] LI M F, WANG Y J, YANG S L, et al. Improving Mechanical Properties and Electrode Life for Joining Aluminum Alloys with Innovatively Designated Newton Ring Electrode[J]. Journal of Manufacturing Processes, 2021, 64:948-959.
• [20]曹雪龙,王刚,邢昌,等.铜/镍箔中间层对铝/钢激光焊接接头组织与力学性能的影响[J].航空材料学报,2020, 40(2):70-78.
• [21]王楠楠,邱然锋,石红信.基于中间层的铝合金/钢电阻点焊[J].材料热处理学报, 2019, 40(1):155-160.
• [22]李佳,陈地群,冉启洪,等.采用Ni中间层的5052铝合金/DP600车用钢电阻点焊研究[J].电焊机, 2020, 50(12):9-13+108.
• [23]张会云,沈巍.纯铝中间层厚度对铝/钢点焊接头性能的影响[J].电焊机, 2012, 42(8):88-90+93.
• [24] QIU R F, IWAMOTO C, SATONAKA S. Interfacial Microstructure and Strength Of Steel/Aluminum Alloy Joints Welded by Resistance Spot Welding with Cover Plate[J]. Journal of Materials Processing Technology,2009, 209(8):4186-4193.
• [25] IBRAHIM I, ITO R, KAKIUCHI T, et al. Fatigue Behaviour of Al/Steel Dissimilar Resistance Spot Welds Fabricated Using Al–Mg Interlayer[J]. Science and Technology of Welding and Joining, 2016, 21(3):223-233.
• [26] ZHANG W H, SUN D Q, HAN L J, et al. Interfacial Microstructure and Mechanical Property of Resistance Spot Welded Joint of High Strength Steel and Aluminium Alloy with 4047 AlSi12 Interlayer[J]. Materials&Design, 2014, 57:186-194.
• [27]汪小培,张永强,鞠建斌,等.凸焊电流对高强钢螺母凸焊焊点质量的影响[J].焊接技术, 2017, 46(3):72-76+98.
• [28]杨旭乐,崔占生.白车身凸焊技术[J].现代零部件,2013(1):84-85.
• [29] ZHANG G T, ZHAO H, XU X H, et al. Metallic Bump Assisted Resistance Spot Welding(MBaRSW)of AA6061-T6 and Bare DP590:Part I-Printing of Metallic Bump[J]. Journal of Manufacturing Processes, 2019, 44:427-434.
• [30] ZHANG G T, ZHAO H, XU X H, et al. Metallic Bump Assisted Resistance Spot Welding(MBaRSW)of AA6061-T6 and Bare DP590:Part II-Joining Mechanism and Joint Property[J]. Journal of Manufacturing Processes, 2019, 44:19-27.
• [31] ZHANG G T, LI Y B, LIN Z Q. Evolution Mechanism of Geometry Morphology for Metallic Bump Assisted Resistance Spot Welded(MBaRSW)Joints[J]. Journal of Manufacturing Processes, 2020, 59:432-443.
• [32] ZHANG G T, LI Y B, LIN Z Q. Failure Mechanism of AlSteel Resistance Spot Welding(RSW)Welds and a Metallic Bump Printed on Al Sheet-Assisted RSW(MBaRSW/Al)Welds During Lap-Shear Tests[J]. Metall Mater Trans A, 2021, 52(11):4922-4933.
• [33] SHAH U, LIU X, BENATAR A, et al. Computational Analysis of the Ultrasonic Effects on Resistance Spot Welding Process[J]. Journal of Manufacturing Processes,2022, 81:191-201.
• [34] LU Y, MAYTON E, SONG H, et al. Dissimilar Metal Joining of Aluminum to Steel by Ultrasonic Plus Resistance Spot Welding-Microstructure and Mechanical Properties[J]. Materials&Design, 2019, 165.
• [35] LU Y, SAGE D D, FINK C, et al. Dissimilar Metal Joining of Aluminium to Zinc-Coated Steel by Ultrasonic Plus Resistance Spot Welding-Microstructure and Mechanical Properties[J]. Science and Technology of Welding and Joining, 2020, 25(3):218-227.
• [36] REN B K, ZHOU K, WANG G, et al. Understanding the Mechanisms Behind Ultrasonic Vibration in Resistance Spot Welding of Aluminum and Steel[J]. Journal of Materials Processing Technology, 2024, 329.
• [37]张新戈,李俐群,陈彦宾,等.铝合金激光-电阻复合焊接特性研究[J].中国激光, 2010, 37(5):1404-1408.
• [38]陈树君,王超,郝素锋,等.热冲压高强钢电阻+激光组合点焊工艺[J].焊接学报, 2013, 34(5):5-8+113.
• [39] LI M F, TAO W, ZHANG J Z, et al. Hybrid ResistanceLaser Spot Welding of Aluminum to Steel Dissimilar Materials:Microstructure and Mechanical Properties[J].Materials&Design, 2022, 221.
• [40]李洋,姚杞,张禹,等.外加磁场对铝合金电阻点焊质量的影响[J].焊接学报, 2015, 36(12):69-72+116.
• [41] HU S Q, HASELHUHN A S, MA Y W, et al. Effect of External Magnetic Field on Resistance Spot Welding of Aluminium to Steel[J]. Science and Technology of Welding and Joining, 2022, 27(2):84-91.
• [42]易金权,曾凯,丁燕芳,等. DP590高强钢双脉冲胶接点焊的工艺研究[J].材料科学与工艺, 2019, 27(4):91-96.
• [43] CHEN N N, WANG H P, WANG M, et al. Schedule and Electrode Design for Resistance Spot Weld Bonding Al to Steels[J]. Journal of Materials Processing Technology,2018, 265:158-172.
• [44] HAYAT F. Comparing Properties of Adhesive Bonding,Resistance Spot Welding, and Adhesive Weld Bonding of Coated and Uncoated DP600 Steel[J]. Journal of Iron and Steel Research International, 2011, 18(9):70-78.
• [45]王健强,袁波,钱让发,等.铝合金胶接电阻点焊工艺研究与优化[J].热加工工艺, 2019, 48(15):133-135+139.